See the first installment of this guitar’s build gallery.
There are a lot of ways to apply a sunburst. I like to use wood dye and work directly on the wood similar to the method used by violin makers (and guitar and mandolin makers before sprayed finishes became the norm). The method enhances the grain of the wood because dye interacts with it, becoming darker in the areas where the water base of the dye is held and stays wet, like areas with curl in the wood fibers. If you love the quirkiness of wood and like the way that watercolors look, then this method might be for you. It is, however, less predictable than spraying color coats over a sealed wooden surface. I think it’s worth the extra work and a little risk! Continue reading “Making a Dyed Sunburst”
I’ve recently started a new build, an adirondack and sugar maple 12-fret grand concert guitar that will be clean and contemporary-looking, with a sound port and paddle headstock featuring really sharp-looking Gotoh “X-finish” tuners. Notably, this guitar will be my first production guitar to use double sides and solid lining, which I’m pretty excited about. The goals for this guitar’s sound are a focused bass with good carrying power and trebles that are thick, musical and committed.
See the next installment of this guitar’s build gallery.
In the odd snatches of time while glue is drying or shellac is curing, I’ve been working on a new technique: building guitar rims using two slats of wood per side, laminated together to form a double-thick side (~.150″ thick). It adds quite a bit of complexity to the rim-building process–more steps and added time–but I’m really excited about the new acoustic possibilities. And one of my awesome buyers has agreed to wait a little longer for his instrument, so we can implement this approach to further increasing the contribution of his guitar back to the overall sound.
Why double sides?
I decided to try this technique after reading the excellent book by Australian luthiers Trevor Gore and Gerard Gilet, “Contemporary Acoustic Guitar Design and Build.” I was especially impressed by Gore and Gilet’s discussion of the current state of thinking in guitar acoustics. I’m a believer in responsive-backed instruments; I build lightweight backs braced to encourage the plate to vibrate like a second soundboard. This complicates the acoustics, because the top and back and body cavity (air space) all need to work together harmoniously, or the efficiency of the system is hampered, and you get a run-of-the-mill, un-explosive, disappointing guitar. Gore is also a fan of the live-backed guitar, and he has found that one of the ways to improve the coupling between the top and back of the instrument is to take side vibration out of the equation as much as possible. He also routinely adds heavy weights to his instruments’ ribs to change the relationship of the top to back to body resonances.
Since I had a recent prototype guitar handy, I thought, “Hey, let’s see if this works as advertised.” It did, and even at the measurable rate he estimated (measurements are made by recording thunks on the bridge and the analyzing the recording using an audio tool like Audacity).
So in developing my client’s guitar, I decided that I’d add mass and stiffness to the ribs by laminating together two slats, and use laminated-in-place solid linings instead of kerfed linings. Basically, I’m building a lightweight, guitar-shaped banjo rim and counting on the mass and stiffness difference to dial down the response of the sides and encourage the top and back to communicate more freely.
The method I’m using
I’m pleasantly surprised by the increased stability of the assembled rim. I use a lot of maple, and maple really wants to spring back after bending, but these doubled sides are rock-solid. Once they came out of the vacuum bag, the doubled sides were locked in shape, and I didn’t have to wrestle them into the form to keep their shape. I expect this to take some stress out of the completed instrument body, too.
An unforeseen advantage is that when you’re using two slats, you can make each slat thinner, which is great if you’re using difficult bending woods, like maple. I used .075″ slats rather than my typical .085″ with this sugar maple, and the improved ease of bending and smoothness of the resulting bends is noticeable.
The whole rim, and especially the solid linings, look very cool. I’m shallow, I know, but I want my guitars pretty inside and out, and this finished rim is very clean looking. It looks like the inside of a violin!
Preparing the Rim
Once I was satisfied that the adjustable neck design was going to work on a tenor, I was able to get the rim ready to go.
Closing the Box and Putting the Neck Together
This winter, Dwight Lamb, Nate Kemperman, Amber and I decided it was high time, after playing together for nearly 20 years (!), to record a few tunes together. We wanted to get some of Dwight’s rare and common Missouri Valley tunes down, but we also thought we’d try to capture what it sounds like when friends get together in the music room over a weekend. Missouri Valley fiddle is a little different–with more ornaments, more notes, and *way* more free reeds, it sounds almost Canadian sometimes–and we hope it’ll be a fun listen.
The resulting CD will be called “80” in honor of Dwight’s recent birthday, and we’re hoping to get it released by mid-May.
I’ve been doing some sample mixes and thought I’d share a short excerpt or two just for fun. Musicians: Dwight Lamb & Nate Kemperman, fiddles; Amber Gaddy, pump organ; David Cavins, guitar (a red maple grand concert)
Bill Gray’s Quadrille
The Inimitable Reel
Here’s a gallery I’ll continue updating as I work through the construction of a new sugar maple and adirondack spruce TG-0-inspired tenor guitar. Continue reading “Tenor no 19 Build Gallery”